Importing a DXF file into iCMTGIS PRO

“Hi I am having trouble loading a file into the unit. . . . My error says that it is required to be in LLA, but I would rather use New York East State Plane. Do I have to convert? If so, how?”

This problem is most likely due to the datum and coordinate system used. Please set up the datum, coordinate system, and distance unit in iCMTGIS PRO to match those used for creating the DXF file then load the DXF file.

If your DXF file was created in LLA, then please set iCMTGIS PRO to WGS84 and LLA. If your DXF refers to a newer WGS84 realization, then select that one.

Load the DXF in iCMTGIS PRO then change the coordinate system to NAD83_CORS96/CSRS98 and State Plane and select New York East State Plane.

The above instruction also applies to other CMTINC apps that provide the DXF import functionality.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s